My Chinook

Everything about Chinooks that isn't option specific. Please check if your post is more appropriate in another category before posting here.
dougm
Senior Member
Posts: 516
Joined: June 7th, 2016, 9:25 pm

My Chinook

Post by dougm »

Just bored so i snapped a few pics of the Chinooks current condition. I would list what all i have done to it but it would take me a week to do so.
DSC01140.JPG
DSC01137.JPG
DSC01133.JPG
dougm
Senior Member
Posts: 516
Joined: June 7th, 2016, 9:25 pm

Re: My Chinook

Post by dougm »

Just picked up a brand spanking new TriMark RV Entrance Door Handle Hardware Kit w/Deadbolt #30-0900 for $100 on ebay. I been watching for one forever and they are always $300 used.
User avatar
Scott
**Forum Contributor**
Posts: 616
Joined: October 12th, 2015, 5:54 am
Location: Santa Cruz

Re: My Chinook

Post by Scott »

Looking tough! Nice wheels. I bet you can light up the sky with those lights.

No running boards?

Did you get your alignment sorted out?
1994 Premier
dougm
Senior Member
Posts: 516
Joined: June 7th, 2016, 9:25 pm

Re: My Chinook

Post by dougm »

Yes i finally got the suspension issues resolved. I still have to install a short LED bar on the back for a porch light :lol: I took the running boards off, i dont think they look right with the lift, i am watching for a set of steps instead. I installed mudflaps on front to keep it from throwing mud and rocks back against the shell. I ordered 4 of these covers for the top lights to help get rid of some of the white...
hla-135236021_xl.jpg
Picked this kit up from Rough Country to run all the lights...
Capture.PNG
Last edited by dougm on October 26th, 2018, 4:01 pm, edited 3 times in total.
68camaro
**Forum Contributor**
Posts: 672
Joined: May 16th, 2018, 4:49 pm

Re: My Chinook

Post by 68camaro »

Looks great, can I ask what front bumper you are running? I like the hood bra, whose is that also?
2001 Concourse XL Lounge model, 6.8L Ford E350 Triton V-10 Chassis.
dougm
Senior Member
Posts: 516
Joined: June 7th, 2016, 9:25 pm

Re: My Chinook

Post by dougm »

The bumper is made by a company called TrailReady. I cant recall who makes the Bra, i looked and looked for a T-bra versus what i ended up getting but i couldnt find anyone that makes one anymore. I will check to see if the tag is still on the bra and let you know but i may have torn it off so it didnt stick out between the fender and hood. I stuffed a 17,500 LB winch behind the bumper, but the bumper is only rated for 16,500 LB's... :lol: heres a pic of the bra im looking for if anyone runs across anyone selling....
n-jeep-hard-rock-hood-vents.jpg
dougm
Senior Member
Posts: 516
Joined: June 7th, 2016, 9:25 pm

Re: My Chinook

Post by dougm »

After battling the suspension for what seemed a lifetime i can finally say i am pleased with the final results (trust me thats saying alot because when it comes to mechanical issues it has to be perfect). Now the only large purchase i have left to make is new air suspension seats. I yanked all the old dirty carpet and installed a new vinyl floor matt in the driver compartment, and all new rigid vinyl plank flooring in the living quarters. I need to build a cabinet to put over the furnace and redo the cabinet that the stove is on so i can cover the wheel well on that side and reinstall the factory vaccuum cleaner because i tore out the dinette stuff to make more floor space for the dogs. I also want a flat cooktop versus this messy looking atwood grease magnet. Oh i also have a special console being built to replace the fugly OEM thing on the dog house but i will make another post when it gets here next month.
68camaro
**Forum Contributor**
Posts: 672
Joined: May 16th, 2018, 4:49 pm

Re: My Chinook

Post by 68camaro »

Thanks, I am currently deciding between Trailready's pre-runner style and Aluminess, cost about the same but Trailready looks alot heavier, any particular reason you chose Trailready?
2001 Concourse XL Lounge model, 6.8L Ford E350 Triton V-10 Chassis.
dougm
Senior Member
Posts: 516
Joined: June 7th, 2016, 9:25 pm

Re: My Chinook

Post by dougm »

Because most of the other bumpers dont look right to me on the E-350 including Aluminess. Trailready allowed me to select which lights i wanted and then built the bumper accordingly. Having actual fog lights in the bumper was an absolute must for me as well as the strength to mount a winch with a large capacity. Beyond that it looks nice on the ford vans. Oh and they were having a special when i bought it 'free shipping" which made the decision for me, but then after the bumper was built and they found out it was going to cost $300 to ship it to me in Nebraska they tried to renig on the free shipping, course i said not a chance, so they then tried to get me to pay half the shipping and i said i am not paying one stinking dime for shipping, you advertised free shipping and that why i purchased from you versus someone else.... even without shipping the cost of the bumper is astronomical when you add two sets of lights at $260 bucks a pair and any other options you want. I ordered mine via the bumper superstore, but before it was over i was dealing with trailready directly because bumper superstore #1 tried screwing me on free shipping #2 doesnt know the products they are advertising and selling. I would not recommend bumpersuperstore for your purchase, deal direct with the manufacturer.
Last edited by dougm on October 26th, 2018, 6:12 pm, edited 1 time in total.
68camaro
**Forum Contributor**
Posts: 672
Joined: May 16th, 2018, 4:49 pm

Re: My Chinook

Post by 68camaro »

That's good to know, sorry for your hassle though. I am looking at bumpersuperstore as they have these on sale right now, plus free shipping. I will look out for them doing same thing.

I agree on the way Aluminess looks on an e-350, they look "off" compared to the Trailready which flows with vans front end much better.
2001 Concourse XL Lounge model, 6.8L Ford E350 Triton V-10 Chassis.
Post Reply