Leveling Chinook with 1 front wheel

Everything about Chinooks that isn't option specific. Please check if your post is more appropriate in another category before posting here.
Post Reply
kevin donald
Posts: 26
Joined: January 13th, 2020, 11:17 am

Leveling Chinook with 1 front wheel

Post by kevin donald »

Does anyone know if wiil damage the front suspension to drive up onto just one 8 inch leveling block with the right front wheel and leave it like that for a month or so? The front end on our Quigley Converted Chinook Baja 4x4 is shock and coil suspension. It is in a nice location on our property however leveling it necessitated the use of just one block in the front. Thanks for any feedback. Cheers!
IMG_9745.jpg
chin_k
**Forum Contributor**
Posts: 2257
Joined: June 26th, 2017, 9:38 pm
Location: Southern CA

Re: Leveling Chinook with 1 front wheel

Post by chin_k »

Short term should be fine, but if it is my rig, and I spent the money on the Quigley, I would take care of it better. With one block, looks like it is level inside the rig, but there is a torsion twist along the axis of the axle, so that the front counteract the twist of the rear. The best way to level a rig is to level the wheels. If it is just a overnight stay in a cheap camp site, I would just let it go. But if it is on this spot for a few weeks, it should not be difficult to distribute some of the block from the 8 inch level to the driver side, and find a short piece to put in the right dually.
2000 Concourse dinette, on 1999 6.8L Ford E350 Triton V-10 Chassis
kevin donald
Posts: 26
Joined: January 13th, 2020, 11:17 am

Re: Leveling Chinook with 1 front wheel

Post by kevin donald »

Thanks for the suggestion. Much appreciated.
Post Reply