Removal of backrests on couch & dinette on Chinook Premier
Posted: March 22nd, 2015, 7:51 am
I purchased a 2002 Chinook Premier last Fall & am trying to modify the couch bed by removing the backrest. My wife & I prefer not to open up the couch since it eliminates the aisle. Removing the back would also increase the size of the mattress surface area & enable us to better utilize the space behind the backrest. Removal will be difficult mainly due to limited access. The back's hinge seems to be held by rivets rather than by nuts & bolts. I know one owner who had a professional do it and another who removed the couch and replaced it with a custom bed rebuilt with 2 X 4s & plywood. Ideally I like to remove the backrest w/o cutting the frame so that when we eventually sell our rig we'll have the backrest available should the buyer prefer it in the original configuration. I plan to contact Flexsteel Inc. for ideas.
I'm also making the dinette backrest just behind the passenger seat removable to increase the legroom for sleeping. I plan to remove the long horizontal hinge and install 2 or 3 large barrel latches. Elbow room will again be a challenge.
Any suggestions would greatly be appreciated. Revealing photos even more so...
George
I'm also making the dinette backrest just behind the passenger seat removable to increase the legroom for sleeping. I plan to remove the long horizontal hinge and install 2 or 3 large barrel latches. Elbow room will again be a challenge.
Any suggestions would greatly be appreciated. Revealing photos even more so...
George