Page 1 of 1
Torn rear end rubber bushings (suspension)
Posted: August 19th, 2019, 5:17 pm
by Dadams6612
Ok, still figuring out my 2003 Chinook,
Come to find out it is on a 2002 Ford E350 chassis, both rear rubber suspension bushings are tore , any ideas on where to find replacements?
Re: Torn rear end rubber bushings (suspension)
Posted: August 19th, 2019, 6:02 pm
by chin_k
They are made by MorRyde, and they are about $200-300 each. You can order them from the manufacturer. The installation is not too bad, but some mechanics with no experience may end up spending 6 or more hours on it. With some preparation, it took me 3 hours for the driver side, and 6 or maybe 8 hours for the passenger side (the exhaust was in the way). There are a few threads on this on this forum, and I think you will find them to be informative.
viewtopic.php?f=13&t=1476
viewtopic.php?f=4&t=812
and many others.
Re: Torn rear end rubber bushings (suspension)
Posted: August 19th, 2019, 6:57 pm
by HoosierB
I'm fortunate to live within a few miles of the MorRyde plant, and was able to get my rubber replacement parts quick and cheap. The installation was done at a large, local fleet truck service center who had the experience and knowledge of the product to do a proper installation. If you're not comfortable with a DIY install, I would recommend local experts in the fleet truck service field.