Page 1 of 1

Stand on Roof

Posted: June 10th, 2019, 9:25 am
by danesk
Greetings,
I am resealing all roof attachment areas (side rails, vents, etc.). I am wondering if I can stand on the very front of the roof to reach the main vent to clean and apply the Dicor - my arms are just not long enough to reach from a ladder. Will the Chinook Concourse hole my 160 lbs. without damage?

Thanks for your time.

Dan

Re: Stand on Roof

Posted: June 10th, 2019, 10:49 am
by markatherton
No problem at all. It is as solid as a rock...

Re: Stand on Roof

Posted: June 10th, 2019, 5:02 pm
by Blue~Go
I concur. It's basically built like a boat deck. Granted, not quite as strong as most boat decks, but then you won't be jumping up and down on it in a seaway, I don't imagine :D (So just don't jump up and down, especially right in the center of the top tier.)

Note that as it is regular gelcoat (no non-skid) it can be a tad slippery. Nothing too crazy, but watch your step.

Re: Stand on Roof

Posted: June 11th, 2019, 5:27 am
by danesk
Thank you Blue~Go and markatherton!

Glad to hear I don't need to grow longer arms. :D